.

3 ROLLS BENDING MACHINE : " IPROLAM :
Model  : MRT 80  x  4 000 mm
Fabrication year 1987

•       Plate width                                4.000 mm
•       Plate thickness                              80 mm
•       Minimum  diameter of rolled plate       1.400 mm
•       Max  stroke of pressing roll                300 mm
•       Max stroke of curving roll                  899 mm
•       Angle of tilting                                  67 degree
•       Installed power                                  425KW
•       Max.  diameter of upper roll               1.025 mm  
•       Max diameter of pressing roll              986 mm
•       Max diameter of curving roll                858 mm
•       Size of machine       
            -    Length                                 13.550 mm
-       Height  from ground                          3.168 mm
-       Total height…                                  4.670 mm
             -   Width                                    4.550 mm
             -  length of the pit                        15.800 mm
              -width of the pit                          6.800 mm
•       Total weight of the machine                 291 tons
•       Bending speeds : 1st  gear 4,46 – 3,12 m/min. 2nd gear 6,14 – 4,30 m/min
•       Pressing roll speed for lateral move                                      74 mm/min
•       Curving roll speed for lateral move 70,1 m/min in 1st gear; 220 m/min in 2nd gear
•       Motors power:
o       Turning rolls motors ; 250 KW & 1000 rot/min
o       Vertical move of pressing roll motor; 32 KW & 1700 rot/min  
o       Vertical  move of curving roll motor :132 KW & 1000 rot/min
o       Lubricating pump motor : 1,5 KW
•       Hydraulic motor for mobile bearing :
o       Piston diameter 500 mm
o       Stroke: 900 mm
o       Working pressure 10Kg/cm2
•       Oil lubricating :
o       Pressure 5 – 7 Kg/cm2
o       Flow   1,8 cubic meters/h
•       Magnet power 80 Kg
•       Description of driving
o       Curving and pressing rolls are rotated through 6 steps reducers from a motor of 250 KW and 1000 rot/min.
o       Curving roll vertical move is driven through a 132 KW motor and a snail  reducer in two steps
o       Pressing roll vertical move is driven through a snail  reducer  in one step.

----------------------------------------------------------------------------------------------------------------------------------------

La macchina e' visibile - smontata - c/o Stabilimento in Romania
completa di parti meccaniche
Prezzo netto per te - caricata - sui mezzi FCA Romania : 280.000 Euro - disponibile - salvo il venduto